How to Get Blood Stains Out of Shoes – 7 Simple Steps

Introduction -

Dealing with blood stains on your shoes? Don’t worry, it’s easier than you think! In this easy-to-follow guide, we’ll show you simple steps to remove those stubborn marks. Whether it’s from a scrape or an accident, we’ve got effective solutions. No need to stress about ruined shoes anymore. With just a few household items, your shoes will look good as new. Say goodbye to stains with these straightforward steps. Let’s get started on restoring your shoes on how to get blood stains out of shoes to their pristine condition!

Understanding Blood Stains -

Blood stains are notorious for setting quickly and becoming difficult to remove. Acting fast is crucial to prevent the stain from becoming permanent. For leather, canvas, or fabric shoes, these steps can remove blood stains.

Materials Needed -

Before we begin, gather the following materials:

  • Cold water
  • Mild detergent
  •  White vinegar
  • Soft brush or toothbrush
  • Clean cloth or sponge
These materials will help you to know, how to get blood stains out of shoes step-by-step.

Step-by-Step Guide: How to Get Blood Stains Out of Shoes

How to Get Blood Stains Out of Shoes

Step 1: Act Quickly with Clean cloth or Paper towel

When you notice a blood stain on your shoes, it’s crucial to act quickly. This step is important to prevent the stain from setting. The longer blood sits, the harder it becomes to remove. Grab a clean cloth or paper towel immediately. Dab at the stain to absorb as much blood as possible. Avoid rubbing, as this can spread the stain further. Repeat the dabbing process until no more blood transfers to the cloth. Act fast to increase the chances of successful stain removal. Once you’ve absorbed most of the blood, proceed to the next step.

Step 2: Cold Water Rinse

After dabbing the blood stain, it’s time for a cold water rinse. This step helps to lift the stain further. Fill a basin or sink with cold water. Submerge the affected area of the shoe in cold water. Let it soak for a few minutes. Cold water helps to loosen the remaining blood particles. After soaking, scrub the area with a soft brush or cloth. This helps to work the blood out of the fabric. Continue scrubbing until you see the stain fading. Rinse the shoe under cold running water. This helps to wash away the loosened blood. It’s a simple but effective method for treating blood stains on shoes.

Step 3: Prepare Cleaning Solution

Now it’s time to prepare a cleaning solution for the blood stain. This solution will help break down the remaining stain. In a small bowl, mix one tablespoon of dish soap with two cups of cold water. Stir the mixture until the soap dissolves. This creates a gentle yet effective cleaning solution. The dish soap works to lift the blood stain from the shoe fabric. Stirring ensures the ingredients are well combined. You’ll use this solution to treat the remaining stain. It’s a simple and inexpensive way to tackle blood stains on shoes.

Step 4: Apply the Solution

With the cleaning solution ready, it’s time to apply it to the blood stain. Dip a clean cloth or sponge into the solution. Ensure it’s thoroughly saturated but not dripping. Gently dab the soaked cloth onto the blood stain. Avoid rubbing, as this can spread the stain. Instead, focus on blotting the area. Allow the solution to sit on the stain for about 10-15 minutes. This gives it time to penetrate and break down the blood. After the time has elapsed, use a clean, damp cloth to blot the area again. This helps to lift the loosened blood from the shoe fabric. It’s a simple yet effective method for treating blood stains.

Step 5: Blot with Clean Cloth

After letting the solution sit on the blood stain, it’s time to blot with a clean cloth. Take a fresh, clean cloth or paper towel. Blot the treated area to absorb the solution and loosen the blood. Continue blotting until you see the stain transferring onto the cloth. Avoid rubbing, as this can spread the stain further. Use a new section of the cloth to prevent the stain from reapplying. Keep blotting until most of the blood is removed from the shoe fabric. This step helps to lift the stain without causing damage. It’s a simple yet crucial part of the stain removal process.

Step 6: Rinse and Repeat

After blotting the blood stain, it’s time to rinse and repeat the process if necessary. Rinse the shoe under cold running water to remove the remaining cleaning solution and blood. Use your fingers to rub the area while rinsing gently. This helps to flush out any remaining particles. Continue rinsing until the water runs clear and the stain is no longer visible. If the stain persists, repeat the cleaning process from the beginning. Apply the cleaning solution, let it sit, and blot with a clean cloth. Repeat this process until the stain is completely gone. Rinsing and repeating ensures thorough stain removal. It’s a simple but effective method to restore your shoes to their pristine condition.

Step 7: Air Dry

Once the blood stain is removed, it’s important to allow your shoes to air dry. Avoid using heat sources like a dryer, as this can cause damage to the fabric. Instead, place your shoes in a well-ventilated area. Stuff them with paper towels or a soft cloth to help preserve their shape. Let the shoes dry for 24-48 hours. This allows them to dry completely inside and out. Check periodically to ensure they are drying. Avoid wearing damp shoes, as this can lead to odor and mold growth. Air drying is a simple and effective method to ensure your shoes are ready to wear again.


Dealing with blood stains on shoes doesn’t have to be a challenge. By acting fast and using proper methods, you can remove stains and restore your shoes’ appearance. Remember to always use cold water, and gentle cleaning solutions, and avoid harsh rubbing. With these simple steps, your shoes will look fresh and clean in no time.

I hope this article will help you know, how to get blood stains out of shoes in simple steps.

Tips for Tough Stains

  • Use Hydrogen Peroxide: For stubborn blood stains, apply hydrogen peroxide to the stain. Let it sit for a few minutes before rinsing with cold water.
  • White Vinegar Solution: A mixture of white vinegar and water can also be effective. Apply the solution to the stain, let it sit for a few minutes, then rinse with cold water.
  • Avoid Hot Water: Hot water can set blood stains, making them more difficult to remove. Stick to cold water throughout the cleaning process.

Common Mistakes to Avoid

  • Using Hot Water: As mentioned, hot water can set blood stains, so always use cold water.
  • Rubbing the Stain: Rubbing can spread the stain and push it deeper into the material.
  • Using Harsh Chemicals: Avoid using harsh chemicals like bleach, as they can damage the shoe material.

5 FAQs

1. Can I use bleach to remove blood stains from shoes?

  • It’s not recommended to use bleach on shoes, as it can damage the material. Stick to gentler cleaning solutions like mild detergent or hydrogen peroxide.

2. How long should I let the cleaning solution sit on the stain?

  • Let the cleaning solution sit for a few minutes to soak into the stain before scrubbing.

3. Will cold water alone remove blood stains?

  • Cold water is good for light blood stains, but tough ones may need a cleaning solution.

4. Can I put blood-stained shoes in the washing machine?

  • It’s best to avoid the washing machine for blood-stained shoes, as the agitation can spread the stain. Hand washing is gentler and more effective.

5. What if the blood stain is on suede or delicate material?

  • For delicate materials like suede, it’s best to consult a professional cleaner to avoid damage.

3 thoughts on “How to Get Blood Stains Out of Shoes – 7 Simple Steps”

  1. Pingback: How to Get Yellow Stains Out of White Shoes - 9 Easy Steps

  2. Pingback: How to Get Gum off Shoe - 5 Easy Steps

  3. Pingback: How To Clean Suede Shoes - 5 Easy Steps

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top